MIRROR LOCK-UP

75

To setTo cancel 1

To cancel 2

 

 

 

q

w

q

q

e

w

ADVANCED

This camera is equipped with a mirror lock-up facility.

To set

1.Set the drive mode selector to [ M. UP ].

2.Press the shutter release button fully to swing up the mirror.

3.Press the shutter release button again. The shutter is released.

•The exposure is locked just before the mirror goes up.

•The audible PCV signal’s beeping can be enabled and will be heard with the drive mode selector set at [ ].

To cancel

1.With the exposure mode set to the Aperture-Priority AE mode, Metered manual mode or Bulb exposure mode:

qSet the Drive mode selector to a position other than [ M. UP ] or set the main switch to [ OFF ].

2.With the exposure mode set to the Programmed AE or Shutter-Priority AE mode:

qSet the multi-exposure switch to the ON position.

wSet the drive mode selector to a position other than [ M. UP ] or set the main switch to [ OFF ].

eSet the multi-exposure switch to the original position.

Note:

Without setting the multi-exposure switch to the ON posi- tion, the film is advanced by 1 frame when the mirror returns to the original position.

OPERATIONS