Pentax IC-360 manual VI. Configuring Administrator’s Data at Homepage, Administrator Login

VI. Configuring Administrator’s Data at Homepage

This page allows the VersaCam Administrator to login and configure the camera remotely. This page may also be accessed by keying in the VersaCam’s IP address and clicking the ‘Start Configuration’ button from the Setup program.

A. Administrator Login

1) Accessing through the Setup Program

First, click on the MAC address to select the desired VersaCam. Then key in its administrator’s password and click the ‘Start Configuration’ button. When you click the ‘Start Configuration’ button, the setup program automatically connects you to the Admin page of the VersaCam IC Series. (For more detailed information, refer to Chapter IV ‘Assigning IP address and Configuring Administrator’s Data’)

2)Accessing through Web Browser Using a Web browser, an administrator can key in the IP address of the VersaCam IC-360 that they are going to configure. Then the administrator accesses the VersaCam IC-360 login page. At the login page, the administrator should key in the administrator’s ID and password to access the Admin page.

The administrator may also access the VersaCam IC-360’s real-time image viewer, and then access the Admin page by clicking the ‘Goto Admin Page’ button. The two login pages look a bit different,

but the administrator can access the Admin page though both login pages.

The default administrator’s ID and password are set to ‘admin’ and the administrator may change them at the Admin page. Note that each ID and password must be composed of up to 9 letters and numbers. Note that both are case sensitive.

20 VersaCam IC-360 User’s Guide