4 TakingPictures

If you take a picture while looking through the viewfinder when the focus mode is set on Macro and Super Macro, the range of the resulting picture will differ from what was seen in the viewfinder. Be sure to check the image on the LCD monitor.

Manual Focus

When the mode is set to z, the central portion of the picture is enlarged to full screen on the LCD monitor for focus adjustment. Use the four-way controller to adjust the focus while watching the indicator on the monitor.

For distant focus

For closer focus

After the focus is set, press any buttons except the four-way controller (23) or take a finger off from the four-way controller (23). The screen returns to the normal display two seconds later.

The central portion of the picture is not enlarged when the digital zoom is enabled.

Saving the Focus Mode 1 p.74

Changing the Focusing Point

In autofocus mode, you can change the focusing point by moving the autofocus area.

1

In Focusing area mode, press the four-way controller

2

(2345) to move the autofocus area ([ ]).

Press the shutter release button.

To return the autofocus area to its original location, press the q s z button again.

38