| Quick Start |
| Taking Still Pictures |
Viewfinder | Power switch |
| Shutter release button |
Mode dial |
|
| Zoom/f/y button |
LCD monitor
The simplest procedure for taking still pictures is described below. The flash fires automatically depending on the light conditions.
1 | Press the power switch. |
|
|
|
046 | ||||
2 | The camera turns on. |
|
|
|
Set the mode dial to A. |
|
|
| |
|
|
| ||
3 | Confirm the subject and shooting |
|
|
|
| information on the LCD monitor. | 7/ 7/2004 | ||
| The focus frame in the middle of the LCD |
| 09:55 AM | |
|
|
|
| |
| monitor indicates the zone of automatic focusing. |
| Focus frame | |
| You can change the size of the subject by |
|
|
|
pressing the Zoom/f/y button.
x: makes the subject bigger. w: makes the subject smaller.
You can check the size of the subject by looking through the viewfinder.
As there is no focus frame in the viewfinder, be sure to check the focusing area on the LCD monitor.
4 Press the shutter release button halfway.
The focus frame on the LCD monitor will light green when the camera is in focus.
5 Press the shutter release button.
The image appears on the LCD monitor for one second (Instant Review) and is recorded on the SD Memory Card or in the
2 QuickStart
27