Pentax Optio T10 manual 147

		Troubleshooting
Problem	Cause	Solution
		Lock focus on another object located at
		the same distance (press shutter
	Subject is difficult to focus	release button halfway), then compose
	on with autofocus	picture and press shutter release
		button fully, or use Manual Focus
		mode (p.64).
		Position subject in focus frame in
		middle of LCD monitor. If the subject is
	Subject is not in focusing	outside the focusing area, aim the
Subject is not in		camera at the subject and lock the
	area	focus (press shutter release button
focus
		halfway), then compose picture and
		press the shutter release button fully.
	Subject is too close	Set focus mode to q (Macro) (p.63).
		Subjects at a distance of 40 cm or
	Focus mode is set to q	greater will be out of focus if taken with
	(Macro)	the focus mode set to q (Macro)
		(p.63).
	Subject is too dark to	Set auxiliary AF light to On (p.66).
	focus on
	Flash mode is set to a	Set to ,(Auto) or b(Flash On) (p.56).
	(Flash Off)
Flash does not	The shooting mode is set
	to C (Movie), the drive
discharge
	mode is set to 1(Cont.	Switch to a different mode.
	Shooting), or the focus
	mode is set to s (Infinity)
	Camera moved when	Use a tripod and the self-timer or
		remote control function when taking a
	taking a picture
Subject is blurred		picture (p.62).
	Subject moved when	Use flash or set a higher ISO sensitivity
	taking a picture	to increase the shutter speed (p.62).
	Camera is unable to
Colors in picture are	automatically adjust white	Check the white balance setting (p.58).
not accurate	balance, or setting is
	incorrect

7

Appendix

145