Use the four-way controller (23) to select [Power Saving].
Press the four-way controller (5). A pull-down menu appears.
The [WSetting] menu appears.
When you press the 3button in A controller (5) twice.
Using the Power Saving Function

You can save battery power by setting the display to dim automatically when no operation is performed for a fixed time. After the power saving function has been activated, the display returns to the ordinary brightness by pressing any of the buttons.

1 Press the 3button in Q mode.

mode, press the four-way

2

3

4 Use the four-way controller (23) to select the time until the camera enters power saving mode.

Choose from [2min.], [1min.], [30sec.], [15sec.], [5sec.] or [Off].

 

Setting

2/3

 

Video Out

2min.

 

Brightness Level

1min.

 

 

Power Saving

30sec.

 

 

Auto Power Off

15sec.

 

Reset

5sec.

 

Delete all

Off

 

 

 

 

 

 

MENU Cancel

OK OK

6 Settings

5 Press the 4button.

The setting is saved.

•Power Saving does not function in the following situations:

-in the playback mode

-while recording a movie

-while the camera is connected to a computer

-while a menu is being displayed

•When no operation is performed right after the camera is turned on, Power Saving is activated only after 15 seconds elapse even if [5sec.] is set.

187