3 Use the four-way controller (2345) to choose the frame you want to use.

4 Turn the zoom lever to the right (y).

The selected frame appears in single-image display.

You can choose another frame using either of the following operations.

Four-way controller (45) Press to choose a different frame.

Zoom lever to the left (f) Returns to the 9-frame display of the frame selection screen, and then lets you choose a different frame in the same way as Step 3.

5

 

 

Press the 4button.

38

The frame appears on the display.

When the camera detects a face, the Face Detection function is activated and the face detection frame appears (p.69).

02/02/2012 14:25

6 Press the shutter release button halfway.

The focus frame on the display turns green when the camera focuses on the subject at the correct distance.

7 Press the shutter release button fully.

The picture is taken.

• In Nmode, recorded pixels is fixed at h(2048×1536).

• When the camera leaves the factory, it includes 3 default frames built- in.

Optional Frames

The CD-ROM (S-SW122) contains optional frames. Copy these frames to the camera to use them (p.165). These optional frames are deleted if the files on the built-in memory are deleted with a computer or if the built-in memory is formatted.

Adding a Frame to a captured image 1p.163

3 TakingPictures

85