4 Press the four-way controller (5). Green Button

5

6

7

A pull-down menu appears.

Choose a function and press the4button.Repeat Steps 3 to 5 to register the necessary functions.Press the 3 button twice.

1Green Mode

2Recorded Pixels

3Quality Level

4White Balance Focusing Area Focus Limiter

MENU Cancel

OK OK

The camera returns to capture status with the current setting.

Using the Green Button
1 Press the Green button in A

 

Green Mode

mode.

 

The function assigned to [1] in [Green

Button] on the [uSetting] menu is called up.

EV Compensation

Next function assigned to Green button

3 CommonOperations

2 Press the Green button again.

The function assigned to [2] is called up. While the screen at right is displayed, use the Green button to recall functions allocated to [3] and [4].

3 Change the settings and press the

4button.

EV Compensation

0.0

Recorded Pixels

The camera returns to capture status.

If the Green Mode has been assigned to the Green button, the camera enters the Green Mode one second after the Green button is pressed (p.64).

If a function other than the Green Mode has been assigned to the Green button, the camera returns to the original screen if no operation is performed for five seconds after the Green button is pressed.

59