Battery cover lock lever

Battery lock lever

2

1

Installing the Battery

Use the battery that is provided with the camera. Charge the battery before using it in the camera for the first time.

1 Open the battery/card cover.

Press the battery cover lock lever in the direction of 1, slide the battery/card cover in the direction of 2 and flip the cover open in the direction of 3.

2 Using the side of the battery to press the battery lock lever in the direction of 4, insert the battery with the side with the PENTAX logo pointing toward the lens.

Push the battery in until it is locked in place.3 Close the battery/card cover.

Press the battery cover lock lever in the opposite direction to 1. Press it until the red area under the lever cannot be seen.

Removing the Battery

1 Open the battery/card cover.

2 Release the battery by using your finger to press the battery lock lever in the direction of 4.

The battery will be ejected. Pull the battery out of the camera.

Do not apply excessive pressure to the front or back of the camera when opening and closing the battery/card cover as this may dislodge the waterproof packing. If the packing is not in the correct position, the waterproof performance of the camera will be compromised.

1 GettingStarted

23