Shutter release button

Four-way controller

OK button

Reducing Camera Shake and Blurring in Pictures (Digital SR Mode)

(Digital SR) mode allows you to set the sensitivity higher than other modes to reduce camera shake and blurring. Shutter speed and aperture are set automatically according to the sensitivity value you set. Use the mode under the shooting conditions that camera shake or blurring tend to occur.

1 Press the four-way controller (3) in Capture mode.

4 Taking

The Mode Palette appears.

2 Use the four-way controller (2345) to select (Digital SR mode).

3 Press the OK button.

4 Press the shutter release button halfway.

Digital SR

MENU Cancel

OK OK

Pictures

The focus frame on the LCD monitor will light green when the camera is in focus.

5 Press the shutter release button fully.

The picture is taken.

•The recorded pixels are fixed to 5M and cannot be changed.

•In Digital SR mode, the sensitivity can now be set to 3200. When using the auto settings, sensitivity is automatically set within a range of 64 to 1600. (1p.102)

75