4 TakingPictures

Changing the Magnification Using the Remote Control Unit

You can not only shoot images with the shutter release button, but also change the zoom magnification with the zoom button using the remote control unit E (optional).

1 Press the four-way controller (2) in Capture mode.

2 Press the four-way controller (45) to select i(Remote control) or h(0 sec remote control).

The function is same either in i (Remote control) or h(0 sec remote control).

3 Press the zoom button on the remote control unit.

Each time you press the zoom button, the zoom position will change among tele, middle, and wide.

You cannot change the zoom magnification with the remote control unit in Super Macro mode. You can change it in Macro mode.

• The buttons on the camera can be used in the normal way.

•Be sure that the remote control unit is no more than about four meters away from the front of the camera.

•When operating with the remote control unit, only the optical zoom is available. Digital Zoom and Intelligent Zoom are not available with the remote control unit.

Life of the Battery for the Remote Control Unit

A signal can be sent from the remote control unit to the camera approximately 30,000 times. Contact your nearest PENTAX customer service center if the battery needs changing. (A charge is made for changing the battery.)

84