Problem | Cause | Remedy |
Subject is not in | Subject is difficult to | Subjects are difficult to focus on using |
focus | focus on | autofocus: objects with little contrast (blue |
|
| sky, white walls, etc.), dark objects, finely |
|
| patterned objects, |
|
| scenery through window or net, etc. Lock |
|
| focus on another object located at same |
|
| distance (press shutter release button |
|
| halfway), then aim at target and press |
|
| shutter release button fully, or use Manual |
|
| Focus mode. |
| Subject is not in focusing | Position subject in focus frame (focusing |
| area | area) in middle of LCD monitor. If the |
|
| subject is outside the focusing area, aim |
|
| the camera at the subject and lock the |
|
| focus (press shutter release button |
|
| halfway), then compose picture and press |
|
| the shutter release button fully. |
| Subject is too close | Set focus mode on q (Macro) or |
|
| r (Super Macro). (p.65) |
| Focus mode is set on | Normal pictures will be out of focus if |
| q (Macro) or r (Super | taken with focus mode set on q (Macro) |
| Macro) | or r (Super Macro). |
Flash does not | Flash mode is set to Off | Set to Auto or b. (p.67) |
discharge |
|
|
The Capture mode is set | Flash will not discharge in these modes. | |
| to Cor Jin dmode, |
|
| Continuous Shooting or |
|
|
| |
| mode. |
|
Zoom will not | Focus mode is set on | Zoom does not function in Super Macro |
work | Super Macro | mode. |
Even though | A long time has elapsed | The “Battery depleted” error message |
you have put in | since the batteries were | may appear when you turn on the power |
a new battery, | removed previously. | after purchasing the camera or after |
[Battery |
| replacing the batteries if the batteries had |
depleted] |
| been removed for a long time. However, |
appears. |
| this is not an error. Wait a short period and |
|
| then turn the power switch on again, the |
|
| power should come on normally. If this |
|
| happens, the date and time, recorded |
|
| pixels and other settings may have been |
|
| initialized, reset the various settings |
|
| according to the procedures in “Setting |
|
| the Shooting Functions” (p.65 to 81) and |
|
|
8 Appendix
135