1 GettingStarted

Powering the Camera

1

2

1

22

(when using AA batteries)

(when using a CR-V3 battery)

Installing the Batteries

Insert the batteries in the camera. Use two AA alkaline, AA lithium, AA Ni-MH, or AA nickel manganese batteries or one CR-V3 battery.

1 Open the battery cover.

Slide the battery cover in the direction indicated by the arrow 1 and flip the cover open 2 .

2 Insert the batteries according to the (+) and (–) indicators on the battery chamber.

3 Close the battery cover and slide it back into place to lock it.

If you intend to use the camera continuously for a long period, use of the AC adapter D-AC5 (optional) is recommended. (p.18)

•AA alkaline, AA lithium, AA nickel manganese and CR-V3 batteries are not rechargeable.

•Do not open the battery cover or remove the batteries when the camera is turned on.

•If you do not intend to use the camera for a long time, remove the batteries, otherwise the batteries may leak.

•The “Battery depleted” error message may appear when you turn on the power after purchasing the camera or after replacing the batteries if the batteries had been removed for a long time. However, this is not an error. Wait a short period and then turn the power switch on again, the power should come on normally. If this happens, the date and time, recorded pixels and other settings may be initialized, reset the various settings according to the procedures in “Setting the Shooting Functions” (p.65 to 81) and “Camera Settings” (p.116 to 129).

•Insert the batteries correctly. If the batteries are incorrectly oriented, malfunction may result. Also, carefully clean the batteries’ terminals.

16