Short operating course

A mercury battery for the light meter is packed separately. Be sure to insert it into the battery housing when operating the camera. For battery insertion, refer to page 17.

1. SET FILM SPEED

Lift the outer ring of the shutter speed dial, turn it around and set the same number as the ASA number of the loaded film to the small red index which appears alongside the figure 1. Then cock the rapid wind lever.

2. SET SHUTTER SPEED

Turn the shutter speed dial and set the speed you wish to use to the index. When outdoors, set the speed to 1/125 sec., or faster, depending upon the lighting. When indoors, set it at 1/30, or in its neighborhood. Change the shutter speed later, when necessary. (Refer to 5 on next page.)

3. COMPOSE AND FOCUS

While viewing through the viewfinder, turn the distance scale ring with your thumb and index finger until you get the sharpest image of your subject at the microprism center of the finder

Reproduced for Historical & Reference purposes by Paul M. Provencher -

6

http://whitemetal.com

 

Page 8
Image 8
Pentax Spotmatic II manual Short operating course, SET Film Speed, SET Shutter Speed, Compose and Focus