• Set the aperture to the sposition while holding down the auto-lock button when using a lens with an aperture ring.

• The shutter speed is displayed on the LCD panel whenever the camera is on.

• You can set a function to enable noise reduction processing when taking pictures at a slow shutter speed. See page 115 for setting Custom Functions.

•You can set a custom function to

automatically compensate the sensitivity to obtain the proper exposure, when the conditions set are not providing proper exposure. See page 115 for setting Custom Functions.

Exposure Warning

If the subject is too bright or too dark, the aperture value will blink in the viewfinder and

on the LCD panel. When the subject is too bright, choose a faster shutter speed. If it is

too dark, choose a slower shutter speed. When the shutter speed indication stops blinking, you can take the picture with proper

exposure.

If both the shutter speed and aperture value

are blinking, this indicates being out of metering range, unable to obtain the proper

exposure even if the shutter speed is adjusted.

Use an ND (Neutral Density) filter if the subject is too bright. Use a flash or faster sensitivity if it is too dark.

63

4 ShootingFunctions