Using the flash in each capture mode

Using b(Shutter priority) Mode

•When taking a moving subject, you can use the flash to change the blur effect.

•Any desired shutter speed 1/150 sec. or slower can be set for taking a flash photograph.

•The aperture automatically changes according to the ambient brightness.

Using Av (Aperture-priority) Mode

•You can set the desired aperture to take a flash photograph when you want to change the depth of field or shoot any far away subject.

•The shutter speed automatically changes with the ambient brightness.

•The shutter speed shifts automatically anywhere from 1/150 sec. to a slow shutter speed that does not cause camera shake. The slowest shutter speed depends on the focal length of the lens in use.

•The shutter speed is fixed at 1/150 sec when any lens other than FA J, FA or F is used.

Slow-Speed-Sync Mode

It is possible to balance the exposure of a foreground subject in a low light background by using the flash to properly expose the foreground subject and a slow-shutter-speed to expose the low light background.

yUsing M (Hyper manual exposure) Mode

1Set the exposure mode to a(Hyper manual exposure) mode

2Set the shutter speed (under 1/150 sec) and aperture value to obtain correct exposure.

3Press the flash pop-up button to activate the flash.

4Take the picture.

91

4 ShootingFunctions

The flash can be raised at any time before taking the picture in Hyper manual exposure mode.