• Set the aperture to the sposition while holding down the auto-lock button when using a lens with an aperture ring.

• The aperture is displayed on the LCD panel whenever the camera is on.

• You can set a custom function to compensate the sensitivity automatically to

obtain the proper exposure, when the conditions set are not providing proper

exposure. See page 115 for setting Custom Functions.

Exposure Warning

If the subject is too bright or too dark, the shutter speed will blink in the viewfinder and on the LCD panel. When too bright, set the

aperture smaller (larger number), and when

too dark, open the aperture further (smaller number). Once blinking stops, you can take the picture.

If both the shutter speed and aperture value are blinking, this indicates being out of

metering range, unable to obtain the proper exposure even if the aperture is adjusted.

Use an ND (Neutral Density) filter if the subject is too bright. Use a flash or faster sensitivity if it is too dark.

65

4 ShootingFunctions