Interval shooting starts.
The camera turns off between shots (during standby). Press the power switch during standby to display the remaining number of pictures and interval on the LCD monitor.
To cancel interval shooting, press the 3button to display the message [Stop interval shooting] and then press the 4button.
• Interval shooting is not available in 5, I, >, z, O, Y, C, or 9mode.
• Refer to p.113 to p.115 for instructions on interval shooting for C,
Q
Press the 4 button.
9
The Interval Shoot setting is saved and the camera returns to capture status.
10 Press the shutter release button halfway.
The focus frame on the LCD monitor turns green if the subject is in focus.
11 Press the shutter release button fully.
3 Use the four-way controller (23) to set the minute, then press the four-way controller (5).
The frame returns to [Start Delay].
Press the four-way controller (3). The frame moves to [Start Delay].
Set the start delay.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set the hour, then press the four-way controller (5).
7
8
Press the four-way controller (3). The frame moves to [Number of Shot].
Set the number of shots.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set [Number of Shot], then press the four-way controller (5).
The frame returns to [Number of Shot].
5
6
MENU
3 Use the four-way controller (23) to set the seconds, then press the four- way controller (5).
The frame returns to [Interval].
Number of Shot Start Delay
2 Use the four-way controller (23) to set the minute, then press the four- way controller (5).
Interval
1 Press the four-way controller (5).
Set the interval.
Interval Shoot
4

0min 10sec

2

0hr 0min

4 TakingPictures

79