Perle Systems manual AS/400 Configuration to support 5250 Workstation Gateway continued, Where

Perle 5250 Configuration

AS/400 Configuration to support

5250 Workstation Gateway continued...

Set AUTOSTART option to *YESGO TCPADM

Set DISPLAY SIGN ON PANEL to *YES and then press ENTER

Perle 5250 Configuration

4End TCP/IP

5Start TCP/IP

PC Configuration for AS/400

Workstation Gateway access

You can use any type of operating systems supported by a Perle 833/833AS/833IS, which can run a graphical Web Browser. Then do the following:

•Install a browser as Netscape or Explorer on your workstation.

•Dial-in to the Perle RAS using TCP/IP protocol.

•Start the browser and enter the following URL address to start the 5250 to HTML Workstation Gateway: http://hostname:5061/WSG or http://AS/400 IP address:5061/WSG

Where:

http: Defines which protocol to be used.

hostname Identifies the system to be reach. This can be the name of the AS/400 or his IP address.

:5061 Is the default port for the Workstation Gateway server.

WSG Specifies to use the HTML Workstation Gateway function. WSG must be in uppercase.

89-7400-01 www.perle.com