Gigabit Media Converter Module – Installation Guide
2
Overview This document contains instructions necessary for the installation
and operation of the Perle Gigabit Ethernet Media Converter
Module(s) that are used in conjunction with a Perle MCR chassis.
The C-1000 are unmanaged media converter modules, and the
CM-1000 are the managed versions. This product converts a
1000Base-TX cable connection (copper) to a 1000Base-X
connection (fiber). The fiber connection can be either single mode
(SM) or multimode (MM) and can operate over different
wavelengths and distances, depending on the model selected
(see table below). For information on the management options of
the CM-1000 module, refer to the MCR-MGT Module User’s
Guide.
Model Connector
(xx) Mode - Distance Wavelength
(TX/RX)
C-1000-M2xx05
CM-1000-M2xx05 SC/ST/LC MM - 550 m/1804 ft. 850/850 nm
C-1000-M2xx2
CM-1000-M2xx2 SC/ST/LC MM - 2 km/1.2 mi. 1310/1310 nm
C-1000-S2xx10
CM-1000-S2xx10 SC/ST/LC SM - 10 km/6.2 mi. 1310/1310 nm
C-1000-S1SC10U
CM-1000-S1SC10U SC SM - 10 km/6.2 mi. 1310/1490 nm
C-1000-S1SC10D
CM-1000-S1SC10D SC SM - 10 km/6.2 mi. 1490/1310 nm
C-1000-S1SC20U
CM-1000-S1SC20U SC SM - 20 km/12.4 mi. 1310/1490 nm
C-1000-S1SC20D
CM-1000-S1SC20D SC SM - 20 km/12.4 mi. 1490/1310 nm
C-1000-S2xx40
CM-1000-S2xx40 SC/ST/LC SM - 40 km/25 mi. 1310/1310 nm
C-1000-S1SC40U
CM-1000-S1SC40U SC SM - 40 km/25 mi. 1310/1490 nm
C-1000-S1SC40D
CM-1000-S1SC40D SC SM - 40 km/25 mi. 1490/1310 nm
C-1000-S2xx70
CM-1000-S2xx70 SC/ST/LC SM - 70 km/43.5 mi. 1550/1550 nm