Operation
Status LED
The Media Converter modules have three status LEDs located on the face plate of the module.
PWR
On – Power On
Blinking Fast – Hardware Error
LK1
On – Signal Detected
Off – No Signal Detected
LK2
On – Signal Detected
Off – No Signal Detected
Troubleshooting
General
∙Ensure the module is securely seated in the chassis. The PWR LED on the module should be On solid.
∙Ensure all cabling is of the correct type and is in good operating condition.
∙Ensure both devices on either end of the fiber are compatible. If using a simplex fiber connection, ensure that you have both an Upstream (U) SFP module inserted and a Downstream (D) SFP module inserted.
9
