Perle Systems IOLINK-520 - page 51

Applications

IOLINK-520 & IOLINK-PRO Installation & Applications Guide — 2.31

EIR

Location: Main

! Configuration

! Connections up

! Remote Site Set-up

! Edit Remote Site

! Connection Set-up

! EIR

The EIR value specifies the indicated data rate that may be available for this

PVC. This value must be set to the same as the value provided by the

Frame Relay network provider. When EIR = 0, no excess burst data is

allowed to be transmitted. If EIR is non-zero, bursting is allowed. The only

restriction is that CIR + EIR > 0.

Configuration: When changing the EIR option for this PVC, the PVC must be disabled and

Note then enabled before the new value will take effect.

The Bridge, IP, IPX, and Compression settings may now be configured within the Bridge,

Parameters, IP Parameters, IPX Parameters, and CCP Parameters menus (note:

compression over frame relay is only available if PPP encapsulation is enabled).

If either the Bridge portion or the IP or IPX router portion of the connection is not

required, the appropriate Connection Protocol setting must be disabled within the

appropriate sub-menu. For example; if an IPX only connection is to be established, the

Bridging and IP parameters must be disabled so that the IOLINK router does not negotiate

the Bridge or IP Connection Protocols on the connection.

Connection Protocol Setting

Location: Main

! Configuration

! Connections up

! Remote Site Set-up

! Edit Remote Site

! Protocol Set-up

! Bridge Parameters

! Bridge enabled

! disabled

! IP Parameters

! IP enabled

! disabled

Disabling a particular connection protocol option will prevent the

IOLINK router from negotiating that Network Connection Protocol.

Leaving all options enabled will result in a Bridge, IP router, and IPX

router connection.

"

""

"

"

""

"

Contents

Main Page Page Export Control Notice Federal Communications Commission (FCC) Canadian Emissions Standard ICES-003 For products marked with the CE Telecommunications label, the following declaration applies: ISDN Type Approval Labels Canadian ISDN Approval Using This Manual Installation Typical Applications & How to Configure Them Introduction to Filtering Menu Trees Page Page Page Page 1 Installation Unpack the IOLINK Router Select a Site Identify the Reset Switch Identify the Connectors IOLINK-PRO IOLINK-520 Connect to the Console Make the Link Connection(s) Power Up the Bridge/Router Managing the IOLINK-520 & IOLINK-PRO Using the Menus Conventions ! ! ! Login to Bridge/Router and Enter the Required Configuration Note: ! ! ! Mandatory Configuration Identify the Status LEDs POWER LAN LINK 1/LAN 2 LINK 2 Page 2 Typical Applications & How to Configure Them 2.1 - Bridging and Routing Should You Bridge or Route? 2.1.1 - Bridging 2.1.2 - IP Routing ! ! 2.1. 2 .1 - IP Addressing 2.1.2.2 Masks 2.1.2.3 - IP Subnets Page 2.1.2.3 - IP Default Gateway 2.1.2.4 - IP Static Route ! ! ! ! ! ! ! ! 2.1.3 - IPX Routing 2.1.3.1 - Novell Servers in Both Locations 2.1.3.2 - Novell Servers in One Location Only Page Page 2.1.4 - PPP Overview 2.1.4.1 - PPP Link Configuration 2.1.4.2 - Numbered Links ! ! ! 2.1.4.3 - Unnumbered Links Page 2.2 Basic WAN Configurations 2.2.1 - Basic ISDN Connections ! ! ! ! ! ! 2.2.1.1 - PPP ISDN Manual Call Quick Connections Page 2.2.2 - Basic Frame Relay Configuration ! 2.2.2.1 - Auto Learning the Frame Relay Configuration 2.2.2.2 - Manual Configuration - LMI Type ! ! 2.2.2.3 - Quick Start Frame Relay ! ! ! 2.2.3 - Basic Leased Line Configuration ! 2.2.3.1 - Quick Start PPP Leased Line Connections ! ! ! 2.3 - Configure Remote Site Profiles Page Page 2.3.2 - Configure Remote Site Profile for Frame Relay ! ! ! Page Page 2.3.3 - Configure Remote Site Profiles for Leased Line PPP ! ! Page 2.4 Advanced Features Page Page Applications 2.38 IOLINK-520 & IOLINK-PRO Installation & Applications Guide Figure 2 -11 NAPT Configuration 2.4.3 - Security 2.4.3.1 IPSec Protocol Suite Page Page Page Page Page Page 2.4.3.2 - Configure PPP Security ! ! Page 2.4.3.3 - Configure Firewall Page Page Page Page 3 Introduction to Filtering MAC Address Filtering Pattern Filtering Popular Filters Bridge IP & Related Traffic Novell IPX Frames NetBIOS &NetBEUI (Windows For Workgroups) IP Router NetBIOS over TCP Other interesting TCP Ports Page MAIN Menu Tree LAN IPX Set-Up LAN-NAT set-up Bridge-STP Set-Up LAN Set-Up IP Address Connect Connections Set-Up BACP Set-Up Schedule Usage Set-Up 4] 8] 5] 4] 5] 4] Edit Route Edit Service 2] IPX Routing Set-Up Static Routes Static Services IPSecurity Set-Up Policy Set-up 5] SNMP Set-Up 4] 5] 6] Page Page Octet Locations B.2 IOLINK-520 & IOLINK-PRO000 Installation & Applications Guide Octet Locations on a Bridged Novell Netware Frame ETHERNET Type Codes Page Page Appendix C Servicing Information Opening of the case and changing of modules is only to be performed by qualified service personnel. WARNING ! Opening the case Identifying the Internal Components To Clear a Lost Password Changing LAN or WAN Interfaces Selecting MDI or MDI-X LAN Interface Installing the ISDN Link Modules Processor settings for the ISDN Link Modules Changing the Termination Straps on the ISDN S/T Interface Connecting to the ISDN-U Link Module Performing a Software Upgrade Page Page Appendix D Interface Pinouts Pinout Information Link Clocking Information ATL-CSU/DSU Link Module Information Switches up down Console Pinouts D.4 IOLINK-520 & IOLINK-PRO00 Installation & Applications Guide V.24 & RS232C Link Pinouts Figure D-5 RS232 Link Pinouts V.11/X.21 Link Pinouts D.6 IOLINK-520 & IOLINK-PRO00 Installation & Applications Guide RS442 & RS530 Link Pinouts Figure D-7 RS530 Link Pinouts V.35 Link Pinouts D.8 IOLINK-520 & IOLINK-PRO00 Installation & Applications Guide RS232 Null-Modem Cable Configuration Figure D-9 RS232 Null-Modem Cable Interface Pinouts IOLINK-520 & IOLINK-PRO Installation & Applications Guide D.9 V.35 Null-Modem Cable Configuration Figure D 10 V-35 Null-Modem Cable D.10 IOLINK-520 & IOLINK-PRO00 Installation & Applications Guide RS530 Null-Modem Cable Configuration Figure D-11 RS530 Null-Modem Cable Interface Pinouts IOLINK-520 & IOLINK-PRO Installation & Applications Guide D.11 RS530 To RS449 Conversion Cable Figure D-12 RS530 to RS449 Conversion Cable V.11/X.21 Null-Modem Cable Configuration Index IOLINK-520 & IOLINK-PRO Installation & Applications Guide A B BACP, 2.50 Bandwidth on Demand, 2.52 Index IOLINK-520 & IOLINK-PRO Installation & Applications Guide N O P Lifetime Warranty Limited Lifetime Warranty Policy Limited Lifetime Warranty Schedules Part 1