Installation and Tapping – Single Keg Beer Dispensers

Connecting the Keg Coupler (when Supplied by Perlick)

Place one brown leather washer into black beer

 

line connector hose on hex nut side. Screw

 

connector to stainless steel beverage line on

 

faucet standard. Tighten with a wrench, but do

 

not over tighten.

Make sure lever handle on the keg coupler is in

 

the UP (untapped) position. Place one brown

 

leather washer into wing nut end of black beer

 

line connector hose and thread onto top of keg

 

coupler. Hand tighten.

Place clamp on one end of red air line. Push

 

end over air valve located inside cabinet.

 

Tighten clamp with screwdriver. Turn shut-off

 

valve to OFF (horizontal) position.

Place clamp on the other end of red air line and

Connecting the Regulator to the CO2 Cylinder

Remove blue plug from regulator fitting. (Note: Do not remove the carbonic washer).

Screw regulator onto gas cylinder valve. Tighten with wrench until vertically straight. Be sure that shut-off valve (black lever) on regulator is in the OFF (horizontal) position.

Place a screw clamp over end of red air line and push onto regulator tailpiece. Tighten clamp with a screwdriver.

REGULATOR

HAND

FITTING

CO2

VALVE

PRESSURE

 

GAUGE

 

30

20 40

PERLICK

1050

push over tailpiece on coupler. Tighten clamp

with screwdriver.

CAUTION: Do not use keg coupler as a

handle to lift keg.

Tapping a Single Valve Keg (Sankey):

Step 1

PSI

0

FITTING FOR RED AIR HOSE

60

CO2

GAS

DRUM

REGULATOR

ADJUSTING

SHUT-OFF VALVE SCREW (BLACK LEVER IN

CLOSED POSITION)

Single Valve Keg Coupler

Step 3

Step 2

OUT

DOWN

Adjusting the CO2 Gas Flow

1/4

TURN

Be sure beer faucet is in closed position.

Align keg lugs with lug openings on bottom of coupler.

Turn clockwise 14 turn. Pull handle out and down. Keg is now tapped.

Open shut-off valve on air distributor located inside of the cabinet.

Important: Be sure to close this valve when untapping keg.

Turn regulator adjusting screw counterclockwise until it turns freely.

Turn hand valve counterclockwise on CO2 cylinder to the fully open position.

Turn regulator adjusting screw clockwise until desired pressure is reached (approximately

12-15 lbs.). Tighten stop nut on adjusting screw.

Open shut-off valve on bottom of regulator.

Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.

Form No. Z2268

4

Page 4
Image 4
Perlick DP32S Installation and Tapping Single Keg Beer Dispensers, Connecting the Keg Coupler when Supplied by Perlick

DS32S, DP32S specifications

The Perlick DP32S and DS32S represent some of the finest offerings in the world of commercial refrigeration and beverage dispensing. These models are designed with a keen focus on efficiency, durability, and performance, making them an ideal choice for bars, restaurants, and any establishment that prioritizes quality beverage service.

One of the standout features of the DP32S and DS32S is their dual-zone design. This allows for separate temperature controls, enabling users to store different types of beverages at their optimal temperature. The models are equipped with advanced digital temperature controls that allow for precise adjustments and monitoring, which is essential for maintaining the quality of craft beers, wines, and other beverages.

Constructed with high-grade stainless steel, these units are built to last. Their robust design not only ensures longevity but also simplifies cleaning and maintenance, thus ensuring a hygienic storage environment for beverages. The smooth finish is resistant to fingerprints and smudges, catering to aesthetic appeal in front-of-house applications.

Both models come with a self-closing door feature, which is designed to reduce the risk of temperature fluctuations caused by open doors. This is enhanced by magnetic door seals that create a tight fit, ensuring energy efficiency while minimizing operational costs.

In addition to temperature control, the DP32S and DS32S boast a high-capacity refrigeration system. This technology allows for quick recovery times, ensuring that your beverages remain at the ideal temperature even during peak service periods. Moreover, these models are designed with energy-efficient components, which can lead to significant savings in energy costs over time.

Another important characteristic is their generous storage capacity. The DP32S and DS32S can accommodate a variety of keg sizes, making them versatile options for establishments that serve multiple beverage types. Adjustable shelving and storage configurations further enhance their usability.

Finally, both models are engineered for exceptional performance. The cooling systems are designed to distribute cold air evenly throughout the cabinet, preventing hot spots and ensuring that every beverage is consistently chilled.

Overall, the Perlick DP32S and DS32S are exemplary choices for any commercial setting looking for reliable, stylish, and functionally superior beverage storage solutions. With their advanced technology and durable design, they stand out as investments that pay dividends in both performance and service quality.