Perlick DS proper co2 han dling (cont...)

installation and tapping

Direct Draw Dispensers Self-Contained

installation and tapping

Direct Draw Dispensers Self-Contained

Perlick is committed to continuous improvement. Therefore, we reserve the right to change specications without prior notice

5Form No.Z2278

Rev. 11.29.10

proper co2 han dling (cont...)

NEVER...

■ Connect cylinder directly to a keg without a

regulator (reducing valve)

■ Drop or throw regulator or CO2 cylinder.

■ Transport CO2 cylinder in a closed vehicle

■ Apply oil to a regulator

■ Shut off CO2 cylinder when not in use. You

will not save gas by doing so!

■ Allow untrained, inexperienced personnel to

handle high pressure gas.

CAUTION: Failure to heed this warning

could result in personal injury or death!

Contents

Main installation and operation instructions DIRECT DRAW SELF-CONTAINED model: DS SERIES C US important information installing and tapping connecting the keg coupler (when supplied by perlick) tapping a singl e valve keg (sankey) installing and tapping electrical connecting the regulator to the co2 cylinder adjusting the co2 gas flow co2 leak test replacing the co2 gas cylinder proper co2 handling proper co2 han dling (cont...) cleaning the cabinet draft beer information temperature HOW TEMPERATURE DRAFT AFFECTS BEER adjusting the temperature cleaning the cabinet draft beer information cleaning the cabinet cleaning the condenser pouring a perfect glass of beer STEP ONE STEP TWO STEP THREE STEP FOUR pouring a perfect glass of beer troubleshooting: beer service problems wild beer flat beer cloudy beer Page for single valve keg coupler (series d) miscellaneous wiring diagram ds series 2, 3 a nd 4 keg coolers