Reversing Door Hinge
Tools Required | STEP 9: |
| |
■ | Phillips Screwdriver. |
| |
|
| ||
■ | #4 Allen Wrench. | STEP 10: |
|
■ | Flathead Screwdriver or Putty Knife | Bottom Hinge Bracket Top Hinge Bracket | |
|
| STEP #3 | |
|
|
|
Right Hinged Door
(as shipped from factory)
Operations to Perform on Cabinet
STEP 1:
Remove bottom hinge pin from assembly.
STEP 2:
Carefully lift and tilt out door assembly from the unit and set aside.
Operations to Perform on Door
Step #14
Step #12 | Step #11 | Step #13 |
STEP 3:
Remove lock rail from cabinet, requires removal of four screws.
STEP 4:
Remove top hinge pin. Remove top and bottom hinge brackets from the unit.
STEP 5:
Remove hinge bushing from bottom hinge bracket and assemble to top hinge bracket.
Remove these screws
Top Hinge Bracket Bottom Hinge Bracket
Hinge Bushing
STEP 11:
Remove bottom door hinge bracket from door assembly and remove door hinge bushing from bracket.
STEP 12:
Remove top door hinge bracket from door assembly and assemble door hinge bushing from STEP 11 to bracket.
STEP 13:
Remove handle and reposition in other set of
STEP 6:
Taking care not to scratch the sur- face, remove hole plugs from the left hinge holes.
STEP 7:
Insert hole plugs into vacant right hinge holes
STEP 8:
Step #7
Step #6
mounting holes directly underneath..
STEP 14:
Remove lock retainer and install on opposite end of door..
STEP 15:
What was the door top is now the door bottom. Carefully lift the door onto the hinge brackets of the cabinet. The two hinge bushings should meet. reinsert the bottom hinge pin to complete the door switching operation.
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
7 | Form No. Z2279 |
Rev 08.01.07 |