Caution! When in bridged mode, loudspeaker cables must be connected directly from the amplifier to the loudspeakers. DO NOT connect to a speaker switch, headphone adapter, or any other device that shares a common ground between channels.
àConnect the signal lead from the desired source to the bridged input. In this instance, the bridged input for channels 5&6 is input 5.
Note: Do not connect anything to input 6.
Input 1 and input 3 are to be used if bridging other channels.
àReconnect the mains power supply to your 6160, and turn the power switch ON.
Note: When in bridged mode, we recommend that the loudspeakers have a nominal impedance no less than 8Ω.
18