14
7777 Care and Maintenance Note:
Never apply liquid directly to the SXP2.
Never use abrasives.
Never rub in a circular motion.
Cover
The cover features a durable high quality powder coat finish. To
remove finger marks and dirt, lightly rub the surface with a soft
cloth.
If the dirt is not re moved, dip your cloth in a mild solution of
soap and water, squeeze excess moisture from it and then gentl y
reapply to the surface.
Stubborn dirt may be removed by the application of a small
quantity of isoprop yl alcohol , ap plied d irectly to the cleaning
cloth only, and reworking the effected area.
Front Panel
The SXP2 front panel features a high quality electroplate finish.
Over time the surface may retain finger marks and may need to
be cleaned to restore it to original condition.
Regular Cleaning
Gently wipe the front panel with a very clean cotton cloth. Wipe
across the surface and never in a circular motion.
Removing Stubborn Marks
Only attempt this infrequently, as too regular or vigorous
application may damage the surface.
Apply a small quantity of any car polish containing car nauba
wax to a very clean cotton cloth.
Note:
The car polish must state “Safe for Clear Coats” as the polish
will therefore contain the absolute minimum amount of
abrasive compound.
Gently wipe over the front panel in lateral motion, allo w to dry
then gently wipe off with a very clean cotton cloth.