6
If you are like us, the first thing you will want to do is to play
your favourite piece of music through your new SXP2 Passive
Preamplifier. The following instructions are written to enable
you to achieve this as quickly as possible. These are not
comprehensive instructio ns, but are designed to enable you to
play music now!
Note:
Please take the time to read the SXP2 manual t horoughly
as it i ncorporates many features, which will enhance its
operation.
Placement
The SXP2 is a sensitive passive electronic device and best r esults
will be achieved when placed away from potential i nterference
from other components and electrical devices, for example AC
mains cords/outlets, transformers, high power amplifiers,
computers, etc.
Place the SXP2 close or near the source or input component in
order to make as short a connection as possible.
Turn off associated components
This minimises the potential to da mage any other components
when connecting your SXP2 into the system.
Connect source to SXP2
Connect the audio output from the source component to the input
of your SXP2 Passive Preamplifier. Refer to Chapter 4 for Rear
Panel information.
Connect SXP2 to power amplifier
Connect the audio output from your SXP2 Passive Preamplifier
to the input of the power amplifier. Refer to Chapter 4 for Rear
Panel information.
Switch on power amplifier
Turn on your power amplifier.