Specifications:
Input sensitivities for rated output of 1.2V RMS into 10kΩ
Auxiliary and tape inputs | 80mV RMS |
Magnetic phono 1 | 2.5mV RMS @ lkHz |
Magnetic phono 2 | 2.6mV RMS @ lkHz variable |
Input overload |
|
Auxiliary and tape inputs | 4.0V RMS |
Magnetic phono 1 and 2 | 110mV RMS |
Rated output | 1.2V RMS (No. 1 output) |
............................................................................................. | |
Maximum output capability | 7V RMS |
Frequency response over all amp and headphone amp | |
Auxiliary input | |
Phono input (R.I.A.A. corrected) | |
Distortion over all amp at rated output |
|
Total harmonic distortion | 0.02% (typically 0.009% at 1kHz) |
Intermodulation distortion | 0.005% (S.M.P.T.E. 50Hz or 6kHz @ 4:1) |
Noise measured on 20Hz to 20kHz bandwidth |
|
Minimum volume | |
Maximum volume auxiliary | |
Maximum volume phono | |
Maximum volume phono | |
Tone controls |
|
Bass | +15dB |
Midrange | +9dB |
Treble | +15dB |
Loudness shelving type | +7dB at 50Hz |
....................................................................................................................................... | +7dB at 15kHz |
Filters |
|
Low 6dB per octave |
|
from 40Hz | |
High 6dB per octave |
|
from 2kHz | |
Total semiconductor compliment |
|
12 IC's (Highspeed low noise, unity gain | 8 Diodes |
at 38MHz and wide bandwidth) | 8 Zener Diodes |
16 Transistors | 1 Bridge Rectifier |
Mains voltage | 230/115 volts AC |
Front panel | 19 inch rack mount |
Inputs/Outputs | R.C.A. Cinch connectors plus DIN for tape 1 and 2 |
;Schematic diagram : Product manual
info@perreaux.com | www.perreaux.com |