2 | Instant Install |
Note:
If you are like us, the first thing you will want to do is to play your favourite piece of music through your new SXV2. The following instructions are written to enable you to achieve this as quickly as possible. These are not comprehensive instructions, but are designed to enable you to play music now!
Please take the time to read the SXV2 manual thoroughly as it incorporates many features, which will enhance its operation.
Configure SXV2 cartridge settings
Set the DIP switches on the SXV2 to correspond with the manufacturers specifications of your particular cartridge. Refer to Chapter 5 for DIP switch setup information.
Placement
The SXV2 is a highly sensitive preamplifier and best results will be achieved when placed away from potential interference from other components and electrical devices, for example AC mains cords/outlets, transformers, high power amplifiers, computers, etc.
Place the SXV2 close or near the turntable in order to make as short a connection as possible between the tone arm and preamplifier.
Turn off associated components
This minimises the potential to damage any other components when connecting your SXV2 into the system.
Connect turntable to SXV2
Connect the audio output from the turntable to the inputs at the rear of the SXV2. Also, connect the turntable earth terminal to the earth post on the SXV2. Refer to Chapter 4 for Rear Panel information.
Connect SXV2 to preamplifier
Connect the line level output of the SXV2 to one of your preamplifier inputs. Refer to Chapter 4 for Rear Panel information.
7
