5 | Customising Your SXV2 |
Caution!
Note:
Impedance
Loading
Table
The Perreaux SXV2 gives you complete access to all cartridge- loading parameters for each channel via the
Two DIP switches are required, as Perreaux engineers have meticulously laid the internal circuitry out on the internal PCB maintaining maximum isolation between channels. Each DIP switch should be set to be a mirror of the other.
Cartridge load settings should be set up to directly correspond to the cartridge manufacturers recommended loading figure. If you don’t know the recommended loading of your cartridge, please contact the cartridge manufacturer or your dealer for this information.
It is recommended that you make adjustments to the settings using a pen or other similar pointed object.
Impedance loading values are set using switches 1 through 5.
Capacitive loading values are set using switches 6 through 9.
Gain values are set using switches 10 and 11.
RIAA curve is selected using switch 12.
NEVER change the DIP switch settings of your SXV2 whilst it is turned on.
Each DIP switch should be set to be a mirror image of the other channel.
Use this table to match the impedance loading characteristics of your SXV2 to that recommended by your cartridge manufacturer, where switch in UP position is OFF and switch in DOWN position is ON. Consult your cartridge documentation for the correct impedance figure.
| R Load |
| Dip Switch Setting |
| ||
|
|
| ||||
| (Ω) | 1 | 2 | 3 | 4 | 5 |
| 47000 | UP | UP | UP | UP | UP |
| 24000 | DOWN | UP | UP | UP | UP |
| 10000 | UP | DOWN | UP | UP | UP |
| 1000 | UP | UP | DOWN | UP | UP |
| 100 | UP | UP | UP | DOWN | UP |
| 10 | UP | UP | UP | UP | DOWN |
12
