Pertech Resources Inc. November 2005 220321A 5
2.75 Inches
1.75 Document Stop
Right Edge of Form Aligned with Right
Edge of Receipt Retail Endorsement. To
center justify check in print zone, docu-
ment guide is 2.625” from dot column #1
1 Inch
Print eld is 2.5” Wide
Right Justify
Validation Print Fields
The 5300 series printer has 2.5 inch wide printeld.
The validation print eld height is adjustable from .17 to 1.75
inches. This can be done via the conguration utility or the
one button setup. An inserted form can be manually aligned
or a optional document guide can be attached to provide a
xed right side stop for the inserted form. The drawings be-
low indicate the typical print positions for a 2 3/4” X 6” form.
The highlighted area is the printeld width and Maximum
height.
Note: The one button set-up only has three selectable docu-
ment stop settings. Using the Conguration Utility the docu-
ment stop can be adjusted to any desired printeld height
within the parameters specied above.See Conguration and
Diagnostics section of this manual for available options.
3 Inches 1 InchPrint Zone
2 Inches for 6” Check
Print eld is 2.5” Wide
Left Justify
3 Inches
3 Inches 1 Inch
Print eld is 2.5” Wide
Right Justify
3.5 Inches
3 Inches 1 Inch
Print eld is 2.5” Wide
Center Justify
3.25 Inches
Bank of F irst Deposit (BOFD) Endorsement A470, bit [print eld is ;larger
Dot column #1 Dot Column #400
Print Zone
2 Inches for 6” Check
Print Zone
2 Inches for 6” Check
3 Inches 1 Inch
Print eld is 2.5” Wide
Right Justify
2.75 Inches
Right Edge of Form Aligned with Right
Edge of Receipt BOFD Endorsement
Effective print area in Endorsement zone
is 1.75” wide.
Print Zone
2 Inches for 6” Check
1.75 Document Stop
1.75 Document Stop
1.75 Document Stop
1.75 Document Stop
Validation and Document Guides3 Inches1 Inch
Print Zone
2 Inches for 6” Check
Doc ument Guide
2.5” Wide Print Field
Left Justify
Right Justify
To 2” Print Zone: