To set the Static Correction Level
Read all the steps before attempting to set the Correction Level.
1.Place the magnet on the Correction Level Key Ring next to the Magnet Key Dot on the Receiver Collar.The Receiver Indicator Light will come on.
2.Remove the magnet from the Key Dot.The number of flashes indicates the Correction Level.
3.To increase the Correction Level, place the magnet next to the Magnet Key Dot within 5 seconds of performing the above step.The number of flashes indicates the new Correction Level.
The Correction Levels increase in strength from 1 to 5. Activating the Magnet Key Dot while the Receiver Collar is on level 5 will cause the
Receiver Collar to revert to level 1. Refer to the Function | (Bottom) | |
and Response Table below to choose the Correction Level |
| |
that best fits your cat. |
|
|
The Receiver Collar is equipped to automatically increase |
| |
the level of Static Correction the longer your cat remains |
| |
in the Static Correction Zone if the collar is set at level 2 | (Top) | |
or above. |
|
|
The Receiver Indicator Light also acts as a low battery |
| |
indicator, flashing every 4 to 5 seconds when battery |
| |
replacement is required. |
|
|
4 | www.petsafe.net |
|
