Petsafe Extra Receiver Prepare the Receiver Collar, To Insert and Remove the Batteries

Prepare the Receiver Collar

Your Receiver Collar comes with short Contact Points installed. Use the long Contact Points for cats with long or thick hair. Tighten the Contact Points with pliers one-half turn beyond finger tight (A). Check the tightness weekly.

To Insert and Remove the Batteries

1.With a coin, unlock the Battery Door and remove it (B).

2.Insert two 3-volt Lithium (CR2032 batteries) into the Battery Door (B).

3.Place the Battery Door back into the Receiver (C).

4.With a coin, slide Battery Door latch to lock it (C).

Replacement batteries (3-volt, CR2032) can be found at many retailers. Contact the Customer Care Centre or visit our website at www.petsafe.net for a list of

common retailers. B C

A	1	2
	2
		3	5
4
	76-A3

www.petsafe.net 3