
To Set the Static Correction Level
Read all steps before attempting to set the Static Correction Level.
1.Remove the clear plastic cover with the edge of the Test Light Tool to expose the Correction Level Button (D).
2.With the battery installed, press the Correction Level Button and release when the Receiver LED Indicator Light lights up (E).
3.The Receiver LED Indicator Light will emit a series of flashes representing the Static Correction Level.
4.Increase the Static Correction Level by pressing and releasing the Correction Level Button within 5 seconds of the previous series of flashes.
5.After setting the Static Correction Level, replace the cover to protect the Correction Level Button. The Static Correction levels increase in strength from 1 to 6. Pushing the Correction Level Button while the Receiver Collar is on
D
E
www.petsafe.net11