Make sure the Receiver Collar battery is

I

properly installed, the Static Correction level is

set at 2 or greater, and the Test Light Contacts

 

are touching the Contact Points (I).

 

Test Light Instructions

1.Make sure the Receiver Collar battery is properly installed. Set the Correction Level to 2 or above.

2.

Hold the Test Light Contacts to

J

K

 

the Contact Points (I).

 

 

3.

Walk toward the Boundary

 

 

 

Zone holding the Receiver

 

Pet

 

collar at your pet’s neck level (J)

 

 

 

Area

 

until the Test Light flashes (K).

 

 

Save Test Light for future testing.

B o u ndary

Zone

Note: If the Test Light does not flash, install a new battery and re-test. If Test Light still does not flash, contact the Customer Care Center at 1-800-732-2677.

www.petsafe.net21