Step | Train Your Pet |
6 | 6A |
6A Rehang your door and begin training your pet. It may help for you to be on one side of the door and your pet on the other. Lift or tape open flap and try to talk your pet through the pet door. After your pet has gone through a few times, allow the flap to touch your pet’s back so they will become comfortable using the pet door. If your pet will not go through the door, tape the flap open until they use it on their own.
Helpful Tip: Try treats or toys to encourage your pet to go through the pet door and become comfortable using it.
Replacement Flaps
Vinyl Flap Replacement and Adjustment
During extreme changes in weather, vinyl flaps can shrink during cold months and expand in warmer months. Easily replace or adjust to ensure a snug fit during seasonal changes.
Closing Panel
The Closing Panel snaps onto the interior frame of the Extreme Weather Pet Door™. It is useful during inclement weather or to keep your pet from using the pet door.
To Replace vinyl flap, remove flap screws and flap support from top of pet door frame.
Note: Interior flap has a flap support, exterior flap does not.
Remove vinyl flap and flap clamp with attached insulated flap.
Note: Interior flap clamp has insulated flap attached, exterior flap clamp does not.
Replace flap clamp with attached insulated flap. Insert new vinyl flap between flap clamp and flap screw holes in top of frame. The PetSafe® logo should be readable on vinyl flap. Replace flap support. Align screw holes in flap support, frame, vinyl flap and flap clamp. Replace and start screws to hold flap in place. Adjust flap horizontally until centered in pet door frame. Adjust flap vertically until magnet bar on frame jumps to meet magnet on bottom of flap. Tighten screws.
An additional closing panel (sold separately) can be used on the exterior frame of the Extreme Weather Pet Door™ for improved weather resistance. See “Replacement Parts and Accessories” on page 10.
To Adjust slightly loosen flap screws on top of pet door frame.
Adjust flap horizontally until centered in pet door frame. Adjust flap vertically until magnet bar on frame jumps to meet magnet on bottom of flap. Tighten screws.
8 | Customer Care Center | www.petsafe.net | 9 |
