5A |
|
|
| 5B |
|
| 1 | 2 | |
|
|
|
| |
|
| 2 |
|
|
|
|
| 3 | 5 |
4 |
|
|
| |
|
|
| ||
| 76 |
|
| |
To Set the Correction Level
Read all steps before attempting to set the | 5D | |
Correction Level. | ||
|
1.Remove the clear plastic cover with a coin to expose the Correction Level Button (5D).
2.With the battery installed, press the Correction Level Button and release when the Receiver LED Indicator Light lights up (5E).
3.The Receiver LED Indicator Light will emit a series of flashes representing the Correction Level.
4.Increase the Correction Level by pressing and releasing the Correction Level Button within 5 seconds of the previous series of flashes.
5.After setting the Correction Level, replace the cover to protect the Correction Level Button.
5C |
5E |
The Correction Levels increase in strength from 1 to 5. Pushing the Correction Level Button while the Collar Receiver is on level 5 will cause the Collar Receiver to revert to level 1. Refer to the Function and Response Table to choose the Correction Level that best fits your pet.
The Collar Receiver is equipped to automatically increase the level of Static Correction the longer your pet remains in the Static Correction Zone if the collar is set at level 2 or above.
The Receiver LED Indicator Light acts as a low battery indicator, flashing every 4 to 5 seconds when replacement is required.
Function and Response Table
Indicator Light | Correction Level | Collar Receiver Function | Temperament of Pet | |
Response |
|
|
| |
1 | Flash | 1 | Beep and Vibrate (No Static Correction) |
|
2 | Flashes | 2 | Low Static Correction | Timid |
3 | Flashes | 3 | Medium Static Correction | Timid or Average |
4 | Flashes | 4 | Medium High Static Correction | Average or High Energy |
5 | Flashes | 5 | High Static Correction | High Energy |
Flashes once every |
| Low Battery |
| |
4 to 5 seconds |
|
|
| |
Note: Begin training with Correction Level 2 and only increase if your pet does not respond to the Static Correction.
www.petsafe.net | 9 |
