Pfaff 1019, 1015, 1014, 1037, 1035 manual Enters, Press down

RI__II...			LI_.._1				__.J
Winding
Disengage			the		sewing		mechanism			(page 5).
Fit a	second			spool		holder to		the machine
and	place		a	spool		of thread		on	it.	Place a
bobbin		on	spindle			101	so that		pin	0 enters
slot N.		Pull the			thread		from	the spool and
draw	it	through			guide		P and around thread
retainer stud				114.

Then pull the				thread toward				the bobbin win
der	and	wind		a	few turns		of	thread	on	the
bobbin.		Push		the bobbin toward the					right,
press down			the		foot control pedal and					wind
the	bobbin.		The		bobbin winder stops auto
matically when the						bobbin	is	full. Push		the
full	bobbin toward					the left	and take		it out.
Cut	the	thread.

4

N

6