Pfaff 1035, 1019, 1015, 1014, 1037 manual Lower tension

Upper tension					112
N	=	Setting mark.					The	normal		tension
		setting		is	in the white range between
		3 and		5.	The		higher the number, the
		tighter		the tension.
Lower tension
O	=	Regulating				screw.
		Turn	it	left		for	a looser tension, or
P		right	for a tighter tension.
	=	Both	tensions				are	correct.
Q	=	Upper		tension			too	loose	or	lower
R		tension		too		tight.
	=	Lower tension					too	loose	or	upper
		tension		too		tight.

The	correct			lower tension
Let	the bobbin				case with a	full bobbin			hang
down		freely		by	the thread.	It	must	not	slide
down		by its		own weight, but			should
gradually			move		downwards	when		you	jerk
your		hand	upwards lightly.
Once		the	lower tension has been					set
correctly,			only the upper thread tension
should be			adjusted.

4

j

4	—
	Q-’

-‘I

I.

10