Care and maintenance

 

 

 

 

10

Care and maintenance

 

10.01

 

Servicing and maintenance intervals

 

 

 

 

 

 

 

Clean the hook compartment ................................

Daily, several times if in continuous use

 

 

Clean the entire machine ..................................................................................

once a week

 

 

Check oil level .................................................................................................

once a month

 

 

 

 

These maintenance intervals are calculated for the average running time of a single shift operation. If the machine is operated more than this, shorter intervals are recommended.

10.02 Cleaning the machine

The cleaning cycle required for the machine depends on following factors:

Single or several shift operation

Amount of dust resulting from the workpiece

It is therefore only possible to stipulate the best possible cleaning instructions for each individual case.

For all cleaning work the machine must be disconnected from the mains by switching off the on/off switch or by removing the mains plug! Danger of injury if the machine suddenly starts up .

The following tasks are recommended during single shift operation to avoid operational errors:

● Tilt machine backwards.

● Clean the clamps and clamp area daily, or more often during long-term usage.

● When righting the sewing head, ensure pressing the anti-tipping device 1.

1

Return the machine to its upright position using both hands! Danger of injury by crushing between the edge of the machine and the table top!

Fig. 10 - 01

29