Preparation

9.03

Removing / Inserting the bobbin case

 

 

Switch off the machine!

 

1

Danger of injury due to uninten-

 

2

 

 

tional starting of the machine!

 

 

Removing the bobbin case:

 

 

● Tilt back the machine.

 

 

● Raise latch 1 and remove bobbin case 2.

 

 

Inserting the bobbin case:

 

 

● Press bobbin case 2 until you feel it snap

 

 

into the bobbin case base.

Fig. 9 - 03

9.04

Inserting the bobbin case / Adjusting the bobbin thread tension

● Insert the bobbin into the bobbin case. ● Pass the thread through the slot under

the spring according to Fig. 9-04. ● Pass the thread through the notch. ● Adjust the thread tension by turning

screw 1.

1

Fig. 9 - 04

When the thread is pulled, the bobbin must rotate in the direction of the arrow.

27