Preparation

9.02 Winding the bobbin thread, adjusting the thread tension

51

4

3 2

Fig. 9 - 02

●Place an empty bobbin 1 onto bobbin shaft 2.

●Thread the bobbin in accordance with Fig. 9-02 and wind it clockwise around bobbin 1 a few times.

●Switch on the bobbin winder while at the same time pressing bobbin winder spindle 2 and lever 3.

The bobbin fills up during sewing.

●The tension of the thread on bobbin 1 can be adjusted with knurled screw 4.

●The bobbin winder stops automatically when bobbin 1 is full.

●Remove the filled bobbin 1 and cut the thread on knife 5.

26