Getting started embroidering
1.After attaching the embroidery unit and embroidery foot, insert a bobbin with lightweight bobbin thread.
Note: Make sure that the IDT is disengaged.
2.Hoop a piece of fabric and slide on the hoop.
3.Open selection menu (A) to select a design. Touch it once to load to embroidery edit.
4.The machine automatically switches to embroidery edit. The design is placed in the center of the hoop.
5.Switch from embroidery edit to embroidery
6.Thread the machine with the first color in the color list (C).
B A
B
Embroidery Mode - Preparations
C
7:5
