creative vision™ Embroidery collection

Page through the creative vision™ Embroidery collection for designs and fonts.

The design number, stitch count (number of stitches in the design) and the design size are displayed next to each design. The suggested thread colors for each color number are shown.

Connect the embroidery unit

There is a covered socket behind the free-arm, see picture. The cover will open automatically when connecting the embroidery unit.

1. Slide the accessory tray off.

2. Slide the embroidery unit onto the free arm of the machine until it plugs firmly into the socket. If needed, use the level adjusting feet so that the machine and embroidery unit are even. If the machine is turned off, turn it on.

3. A pop-up tells you to clear the embroidery area and remove the hoop for positioning. Touch OK. The machine will calibrate and the embroidery arm will move to the ready position. This calibration will set your embroidery functions each time you slide on the embroidery unit.

Make sure not to calibrate the machine with the embroidery hoop attached as this can damage the needle, presser foot, hoop and/or the embroidery unit. Be sure to clear all materials from around the machine before calibrating so that the embroidery arm does not bump into anything while calibrating.

Remove the embroidery unit

1.To store the embroidery unit in the embroidery

case, move the embroidery arm to park position by selecting park position on the screen in either embroidery edit or embroidery stitch-out.

2. Press the button at the left, underneath the embroidery unit (A) and slide the unit to the left to remove it.

3. The cover of the socket closes automatically.

4. Store the embroidery unit in the original

A

packing material, place in the soft carrying bag.

Embroidery Mode - Preparations

7:3

Page 3
Image 3
Pfaff Embroidery Machine Creative vision Embroidery collection, Connect the embroidery unit, Remove the embroidery unit