Phantom Tech SU0508L Installing the Bottom Rail, Bottom RailType“A” Flat Surface

Installing the Bottom Rail

If the Bottom Rail did not require cutting, it
is important to select the correct Bottom Rail
for installation. The Sure View Screen
package comes with two Bottom Rails to
accommodate both flat and angled door sill.
Please refer to (A) to determine the correct
Bottom Rail.	A
1. Remove the backing on the adhesive strip
on the Bottom Rail.
2. While slightly lifting the Sliding Bar,
insert one end of the Bottom Rail
into the groove at the bottom of
the Sliding Bar Bottom Cap. (B)

B

Sliding

Bar

Screen Housing

Bottom Rail

NOTE: If using the Angled Bottom Rail, ensure that it is oriented so that the top of the Bottom Rail is flat and level when placed on the door sill.

3.Position the other end so that the center of the Catch Frame aligns with the center of

the Bottom Rail. (C) When aligned, press the Bottom Rail firmly onto the door sill.

4.Fasten the Bottom Rail to the door sill using the 5/8” (16 mm) Self-Tapping Screws provided. It is not necessary to pre-drill the surface below.

Bottom RailType“A”

Flat Surface

Bottom RailType“B”

Angled Surface

Catch
Frame
Align The
Centre
Bottom	C
Rail
5/8”	(16 mm)
Self Tapping
	Screw
Bottom
Rail

14