Phantom Tech SU0508L installation manual Getting to Know the Sure View Screen

Getting to Know the Sure View Screen

Before beginning, become familiar with the Sure View Screen and the door on which it will be installed.

	Sliding Bar	Sliding Bar
Top Rail	Top Cap
		Top Rail
Mesh Lock		End Cap
Adjuster

The Sure View Screen can be installed on both in-swing and out-swing doors. In-swing doors open to the inside of

the home and require the Sure View		Screen
		Housing			Catch
Screen to be installed on the outside of
			Catch		Frame
the home. Out-swing doors open to the
outside of the home and require the Sure			One Touch
			Latch
View Screen to be installed on the inside
of the home.					Bottom Rail
Does the Sure View Screen fit the					Type A or B
	Spring Tension
Door Opening?		Adjuster
		Retracting	Sliding Bar
Make sure the Sure View Screen will		Mesh Guide	Bottom Cap
fit the door. The Sure View Screen will		Is the Door Opening Square?
accommodate a door opening of up to		For the Sure View Screen to operate
36” (914 mm) wide and 81 1/4” (2,064
		effectively, the door opening		must be
mm) high. If the door opening is larger
		perfectly square. Using a Carpenter
than this, the Sure View Screen can still
		Square, check to ensure that the door
be installed by attaching a filler strip
		frame is square. If not, use shims to bring
under the door frame to reduce the height
		the door frame to square before beginning
of the door opening. Refer to page 6 for
		installation.
details.
Is there enough Mounting Surface for the		Is this Sure View Screen being installed
		on a Left Hinged Door?
Sure View Screen?
The Sure View Screen is a recess mount		Finally, make sure the right model has
		been purchased! The Sure View Screen
screen which installs on the inside
		in this package is configured for a
surface of the door frame (Mounting
		“LEFT” hinged door. To identify door
Surface as indicated in diagram (A)). To
		hinging, look at the door from the side
ensure that the Sure View Screen is fully
		on which the Sure View Screen will be
recessed after installation, there must be
		mounted. The hinges should be on the
at least 1 5/8” (42 mm) of mounting
		left side and the door knob or handle
surface. However the Sure View Screen
		should be on the right.
can accommodate a minimum
mounting surface of 1 1/8” (28 mm). In
this instance, the Mounting Bracket will		A
extend slightly beyond the door frame.
This mounting surface must be flat and
flush, and at a right angle (90º) to
the door.

4 Mounting Surface