Philco PVD2000 manual Auto Repeat, Recording & OTR One Touch Recording, Timer Recording

B ONCE DAILY WEEKLY

Auto Repeat

This function will playback a tape repeatedly from the beginning when the tape reaches the end.

VCR

1 Press [MENU], and choose	- M E N U -	2 Press [B] for	- M E N U -
“AUTO REPEAT” during playback.	TIMER PROGRAMMING	“AUTO REPEAT”, “ON” or “OFF”.	TIMER PROGRAMMING
	B AUTO REPEAT [OFF]		B AUTO REPEAT [ON]
MENU	CHANNEL SET UP		CHANNEL SET UP
	CLOCK SET		CLOCK SET
	LANGUAGE SELECT		LANGUAGE SELECT

or

Hint

•To cancel Auto Repeat, follow step 1 above. Then, press [B] so that “OFF” appears beside “AUTO REPEAT”. Press [CLEAR/C.RESET] to exit.

•If menu remains on the TV screen after step 2, press [CLEAR/C.RESET] to exit.

•The Auto Repeat playback will start automatically if you select “AUTO REPEAT” to “ON” in the stop mode.

Recording

Recording & OTR (One Touch Recording)

Before: Turn on the TV and set it to channel 3.	3	6	1	2
• If channel 3 has been already occupied for
broadcasting, see “RF Output Channel” section on
page 6.

VCR Functions

VCR

1 Insert a cassette with 2 Select the channel
tab into this unit.	to record.
1	2	3
4	5	6	or SKIP/CH.
7	8	9
	0

3 Press [SPEED] to select the desired tape speed.

SPEED

Tape Speed		Recording/Playback Time
	Type of tape	T60	T120	T160

2

5

4

STANDBY-ON SPEED		OPEN/CLOSE
	AUDIO	/EJECT

1 2 3

SKIP/CH.

4 5 6

VCR/TV

7 8 9

SLOW

0 +10

DISPLAY VCR DVD PAUSE

PLAY

STOP

RECORD

MENUENTER

SETUP TOP MENU RETURN

		REC		TIMER
VIDEO	STANDBY-ON REW	F.FWD STOP/EJECT PLAY	RECORD	IR

AUDIO

5 6 4

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its record tab. To record on it later, cover the hole with adhesive tape.

CHANNEL

Record tab

SP	SP mode	1hour	2hours	2-2/3hours
	SLP mode	3hours	6hours	8hours

4 Press [RECORD] repeatedly to select the desired recording length.

RECORD

	REC	OTR(0:30)	OTR(1:00)
	(Normal recording)
REC	OTR(8:00)		OTR(7:30)

5 To stop recording	6 To eject the
	recorded cassette
	OPEN/CLOSE
STOP	/EJECT

You CAN NOT dub a DVD to a videotape.

To stop recording temporarily (Pause mode)

Press [PAUSE F].

•During the rec-pause mode, five C marks appear on the TV screen. Each C mark represents one minute.

•Press it again to resume recording.

•Pause mode will be automatically canceled after 5 minutes to prevent damage to the tape and the video head.

Hint

•If you want to watch one channel while recording another...

1)If noise appears on the TV screen, press [VCR/TV] to put the unit in TV position.

2)You cannot record one channel while watching another if you have a cable box or satellite receiver.

Timer Recording

VCR

• Insert a tape with its record tab into the unit.

1	Press [MENU], then select “TIMER PROGRAMMING”.
			- M E N U -	TIMER PROGRAMMING
	MENU		B TIMER PROGRAMMING	PROG	12345678
			AUTO REPEAT [OFF]	DATE
			CHANNEL SET UP
				START TIME
			CLOCK SET
				END TIME
			LANGUAGE SELECT
				CHANNEL
				REC SPEED
			Available program number flashes.
2	Select an empty program number.			PROGRAM NUMBER		1
	Then press [B] to go to next step.			DATE	– – / – –	– –
				START TIME	– – : – –
				END TIME	– – : – –	– –
				CHANNEL	– –
		or		REC SPEED	– –
3	Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”.
	Then press [B] to go to next step.			PROGRAM NUMBER 1

or

4	Select the desired date.
	Then press [B] to go to next step.
	or	ONE TIME PROGRAM
		PROGRAM NUMBER		1
		DATE	1 0 / 2 3 MON
		START TIME	– – : – –	– –
		END TIME	– – : – –	– –
		CHANNEL	– –
		REC SPEED	– –

or

• You can set a program one year in advance.

5 Select the desired start time (hour). Then press [B] to go to next step.

ONE TIME PROGRAM

or	PROGRAM NUMBER				1
	DATE	1	0	/ 2 3 MON
	START TIME	0	7	: 3 0	– –
	END TIME	– – : – –			– –
	CHANNEL	– –
	REC SPEED	– –

or

– 12 – EN