Philco PVD2000 manual Functions, Hints for OTR and Timer Recording

PROGRAM NUMBER 1

DATE 1 0 / 2 3 MON

START TIME 0 7 : 3 0 PM

END TIME 0 8 : 3 0 PM

CHANNEL 1 6

REC SPEED SP B SP

SLP

6	Select “AM” or “PM”.
	Then press [B] to go to next step.	ONE TIME PROGRAM
		PROGRAM NUMBER			1
		DATE	1 0	/ 2 3 MON
		START TIME	0 7	: 3 0	PM
	or	END TIME	– – : – –		– –
		CHANNEL	– –
		REC SPEED	– –		AM
				B PM
7	Repeat the procedure in steps 5 and 6 to set the end time.
8	Select the desired channel.
	Then press [B] to go to next step.	ONE TIME PROGRAM
		PROGRAM NUMBER			1
		DATE	1 0	/ 2 3 MON
		START TIME	0 7	: 3 0	PM
	or	END TIME	0 8	: 3 0	PM
		CHANNEL	1 6
		REC SPEED	– –

•If you have connected the unit to a cable box or satellite box as the connection on page 6, select the VCR to channel 3 or 4 (the RF output channel of the VCR). Then, select the desired channel at the cable box or satellite box. Leave the cable box or satellite box on for Timer Recording.

9	Select the desired recording speed, then press
	[CLEAR/C.RESET].	ONE TIME PROGRAM

CLEAR/

C. RESET

or

•To set another program after step 9, press [B]. Then, continue with step 2.

10 Press [SUBTITLE/T-SET]to set timer standby mode.

SUBTITLE

T-SET

•TIMER indicator on the front panel lights up. The unit will change to the DVD mode.

Hint

• To go back one step, press [s] during steps 3 to 9.

To Check, Correct or Cancel a Timer Program

1)Press [SUBTITLE/T-SET] then, [VCR] on the remote control.

2)Select main menu by pressing [MENU].

3)Select “TIMER PROGRAMMING” by using [K/L], then press [B].

4)Select the program number which you want to check by using [K/L]. The details of the program you selected will appear on the TV screen.

•Go to the digit you want to change by using [s/B]. Then, enter correct numbers by using [K/L].

•You may cancel the entire program by pressing [s] while the program number blinks.

5)Press [CLEAR/C.RESET] to exit.

6)Press [SUBTITLE/T-SET]to return to timer standby mode.

To cancel a Timer Recording in progress

Press [STOP/EJECT C A] on the unit.

Functions

Hints for OTR and Timer Recording

•Press [VCR] on the remote control before you set Timer Recording. Make sure the remote control is in the VCR mode, then press [SUBTITLE/T-SET].

•If a tape is not in the unit or does not have the record tab, TIMER indicator on the front panel blinks and Timer Recording cannot be performed. Please insert a recordable tape.

•When Timer Recordings are set, TIMER indicator on the front panel lights up. To use the VCR as usual until the time for the recording, press [SUBTITLE/T-SET]so that TIMER indicator light turns off. Press [VCR/TV] to choose the VCR position. Select either VCR or DVD mode, then continue with the other features as described in this manual.

After an OTR or a Timer Recording has been set, this unit operates as follows:

•If a tape runs out before an OTR or a Timer Recording is finished, the unit ejects the tape. Press [SUBTITLE/T-SET]on the remote control or [STOP/EJECT C A] on the unit, then press [VCR] to activate the VCR function again.

•Once the unit turns to the timer standby mode, no VCR functions are available until [SUBTITLE/T-SET]is pressed.

•To cancel the timer standby mode, press [SUBTITLE/T-SET]on the remote control or [STOP/EJECT C A] on the unit, then press [VCR] to activate the VCR function again.

•The mode of the unit and the remote control may differ (VCR mode or DVD mode) when you set Timer Recording or after you canceled Timer Recording. Press [VCR] or [DVD] on the remote control to select your desired mode before you operate.

When an OTR or a Timer Recording is completed...

•If Auto Power Off for DVD has been activated and there are Timer Recordings on standby, the unit turns off automatically, and TIMER indicator on the front panel lights to indicate the unit is in the timer standby mode.

•TIMER indicator on the front panel flashes if there are no more Timer Recordings on standby.

•If Auto Power Off for DVD has NOT been activated, the unit switches to the DVD mode and all the VCR functions will be unavailable. All the DVD functions are available during OTR, timer standby mode and Timer Recording.

•Press [STOP/EJECT C A] on the front panel or [SUBTITLE/T-SET]on the remote control to use the VCR when the unit is off.

•Press [SOURCE] on the front panel or [VCR] on the remote control to use the VCR when the unit is on. In case Timer Recording is in standby mode, press [STOP/EJECT C A] on the front panel or [SUBTITLE/T-SET]on the remote control, and then press [SOURCE] on the front panel or [VCR] on the remote control.

If you want to use the DVD player during a Timer Recording or while TIMER indicator on the front panel is on or blinking.

•Press [STANDBY-ON]to turn on the unit. Press [DVD] on the remote control to choose DVD mode, then continue with the other DVD features as described in this manual.

NOTE (for Timer Recording) :

• If there is a power failure or the unit is unplugged for more than 30 seconds, clock and all timer settings will be lost.

VCR

– 13 – EN