Vertical flicker appears
Press the Auto button.
Eliminate the vertical bars using the Phase/Clock of More Settings in OSD
Main Controls.
Horizontal flicker appears
Press the Auto button.
Eliminate the vertical bars using the Phase/Clock of More Settings in OSD
Main Controls.
The screen is too bright or too dark
Adjust the contrast and brightness on On-Screen Display. (The backlight of
the LCD monitor has a fixed life span. When the screen becomes dark or
begins to flicker,please contact your sales representative).
An after-image appears
If an image remains on the screen for an extended period of time, it may be
imprinted in the screen and leave an after-image. This usually disappears
after a few hours
An after-image remains after the power has been
turned off.
This is characteristic of liquid crystal and is not caused by a malfunction or
deterioration of the liquid crystal. The after-image will disappear after a
peroid of time.
Green, red, blue, dark, and white dots remains The remaining dots are normal characteristic of the liquid crystal used in
today’s technology.
For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative.
RETURN TO TOP OF THE PAGE